Aquatell Tannin System Installer Settings

Here's how to program or check the installer programming for the Aquatell Tannin System, or any Aquatell system with a regenerant feed.


To access the installer programming menu press and hold the NEXT and UP buttons for 5 seconds, then release:

  • Use the arrow buttons to set the regen day to 5, then press NEXT
  • Use the arrow buttons to set the regeneration time "hour", then press NEXT
  • Use the arrow buttons to set the regeneration time "minute", then press NEXT
Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.